The Van der Velden® FLEX Tunnel is a retractable tunnel, which can be set into operation only when necessary.
When a ship is loaded and sailing in deep draught, the FLEX Tunnel is retracted and embedded into the vessel hull. In this situation, the water flows into the propeller unobstructed. In comparison to a conventional tunnel, the flexible retraction of this system significantly reduces the overall resistance of a vessel.
When a ship sails at shallow draught (e.g. with low water levels) , the propellers are not fully covered in the water, which makes them function less (high resistance and low velocity). This is when the FLEX Tunnel needs to bedeployed. This guarantees water inflow to the propeller, making a ship operational for a longer period of time. With the FLEX Tunnel a vessel can sail longer on shallow waters and/or can take more cargo. The risk of not being operational during shallow water periods is significantly reduced.
The emergence of the FLEX tunnel goes back to 2010, when Damen Marine Components developed the concept together with research institute DST Duisburg. The retractable tunnel was extensively tested at different water depths and speeds in various configurations, also measuring resistance reduction when the tunnel is deployed. There was one clear conclusion;the FLEX Tunnel provides considerably higher operational efficiency for the entire vessel.
For the integration of the FLEX Tunnel, the total hull design should be customised. This innovation is therefore not suited to existing vessels.
Van der Velden® XR Rudder
The XR rudder system is especially developed for optimal propulsion efficiency in combination with first-class manoeuvring characteristics
The design of the rudder trunk is eco-friendly and requires low maintenance.Read More
Van der Velden® FLEX flanking Rudder
The retractable FLEX flanking rudder system is an in-house innovation of DMC, bringing extra efficiency to the inland shipping industry.
The flanking rudder is especially designed to increase water flow to the propellers of the vessels, reduce vessel drag and increase propulsive efficiency.Read More
2DWK Steering System
The 2DWK is an asymmetrical steering system developed for HD and XR rudder systems.
The 2DWK steering system is suitable for every type of vessel, but it is mainly designed for inland vessels.Read More
4DWKK steering system
The 4DWKK is a reliable asymmetric steering system, specifically engineered for the Van der Velden® HD and Van der Velden® XR rudder systems. The 4DWKK is specifically engineered for twin screw inland vessels with four rudders.Read More
SP2700 control system
A unique characteristic of the SP 2700 is its software, which simplifies and improves the start-up process, maintenance and services.
Three options are built into the system, allowing you to choose between main or pilot steering or directly linked emergency steering. FU steering is optional. Alarms are indicated directly on the SP 2700 bridge panel.Read More
HP7000 control system
HP7000 Steering Installation is the world's safest proportional hydraulic installation.
As the rudder position indicator has its own backup system, this unique steering installation is completely independent of the electrical system.Read More