Bearing Clearance Measurement
CONTINUOUS INSIGHT INTO THE CONDITION OF YOUR BEARINGS
BOSS™ BCM is developed for the continuous measurement of the neck and carrier bearing clearance. This is done by electrical wires (sensors) that measure the real-time distance between the rudder-trunk and rudder-stock with 90° offset. These wires are routed inside the rudder-trunk and shielded by protection pipes.
The measurements will be sent to the BOSS™ BCM display, which can be located in the e.g. the steering gear room, engine control room or wheel house. The information displayed contains the initial, maximum and current radial clearance of the neck bearing, the axial clearance of the upper bearing, a statistic of the wear-out pattern and a forecast of the remaining lifetime till replacement.
The data of BOSS™ BCM can be logged and uploaded in the cloud with BOSS™ DCC and DLF applications. Access to the logged data is possible with a smartphone or tablet at a remote location. This allows for e.g. DMC service engineers to keep track of the condition of the bearings and to execute condition inspections, direct failure analyses and quick repair jobs if required (predictive maintenance).
Ultimate manoeuvrability and course-keeping performance with Van der Velden® rudder systems. Various rudder types and profiles for vessels engaged in all types of maritime activity.
BOSS™ DLF automatically logs the measured and monitored data of other BOSS™ applications.
How can we help you?
For questions and/or comments, you can contact us using the details below or through the contact form.